Snooker Tables

When it comes to purchasing snooker tables there are many different sizes and types to choose from. The cheap tables like the folding snooker table type and smaller wooden bed types are ok for a short time, but will warp after a year or so. The best type is always the slate bed table that will last longer than you will and will never warp. These are available in smaller sizes down to 7 foot if you are stuck for space but are a tad pricey with a starting price of £2000 or so.

Full Size Bed Rail

Before you get a snooker table, check you have the room for it. As a general rule of thumb, add 10 feet to each dimension to find out what room size you need. The 12-foot table for example requires a room size of 22 feet by 16 feet to allow for a clean cue action all around the table. The cues are normally 57 inches in length. So for a 7-foot table you need a room of 17 feet by 10 foot 6 inches. (A snooker table is always twice as long as it is wide)

Full Size Bed Rail

When it comes to which one to buy, bear in mind that the actual playing surface is virtually the same on all snooker tables. The price you pay for a table is largely determined by the leg design and wood chosen. The tables can be made either in solid wood like mahogany or ash or made from boxwood covered in a veneer. The tables made from the solid wood are stained to give it the colour you want whilst the veneered type have the correct colour of veneer applied and are less expensive. Also the leg design is also a factor in the cost. A complicated design is more difficult to make and so more expensive.

The larger tables have 8 legs and the smaller tables have 4 legs and the medium size tables have 6 legs. The weight of a big 12-foot table is almost 1 ton and generally the weight of a snooker table is the equivalent weight of 2 men per leg. So a 4-leg table is half a ton up to the full ton for an 8 leg table.

Most of the weight of a snooker table is in the slate of course. The thickness of the slate is usually 1 inch up to 1-¾ inches for the tournament tables. The smaller tables usually have a single piece of slate for tables up to 8 feet. Those pieces of slate are very heavy and would need 3 guys to lift it, and the bigger tables have their slate cut into 3 or 5 pieces so the slate can be lifted and then assembled at the customers house. This is why snooker tables should be professionally installed.

When the snooker table is put together, the frame is assembled first and that has large wooden cross members to put the slate on. The slate is the put onto the frame and if the slate is in separate pieces they are aligned to provide a perfectly flat surface so the gap between the individual pieces is virtually non-existent. The cloth is then stretched over the slate and stapled to the frame to keep the cloth taught. The cushions which already have the rubber and cloth prepared, are then bolted to the frame. The pockets are put on last and are usually made from brass or stainless steel covered in leather running into cloth catchers and then the ball catcher rails.

So if you are thinking of buying a snooker table, first determine what size table will fit in your room and then decide what colour wood would be best in your room from light coloured ash to the dark mahogany. The weight of the table is spread between lots of legs and a standard floor type is usually quite sufficient. Then think of what it would be like to have your own snooker table, the look and feel of it, and enjoy.

Snooker Tables
Full Size Bed Rail

Lensbaby Optic Single Sofa Bed Chair Childrens Bookcase And Storage